What should be paid attention to when discharging from steel silo?

At present, most large enterprises choose steel silo as storage warehouse when storing materials. This is because the steel silo has many advantages such as good sealing, corrosion resistance, and low cost, so the steel silo has won everyone's favor. Let's talk about what aspects should be paid attention to when discharging from steel silo?

1. When the steel silo is discharging, the conveyor should be opened, and then the gate under the silo should be opened.

2. According to the material output of the steel silo, adjust the opening amount of the manual flap valve below the steel silo. But don't open it too much, if the output is too large, it may block the output port.

3. If it is a multi-outlet steel silo design, then we can only open it in the center of the steel silo after it is completely emptied, so as to ensure that the surrounding materials can be emptied smoothly. At the same time, when opening, the two corresponding two sides should be opened first, and then slowly opened to the steel silo, so as to ensure that the flow of the two discharge ports on both sides can be kept equal.

4. When the steel silo is discharging, in the middle process, the vent on the top of the steel silo must be opened to avoid dust explosion accident.

5. After the material is unloaded, the internal sanitation of the steel silo should be cleaned to ensure the convenience of the next use.