The structure and work principle of PPCS series dust collector
2016-01-07
The structure and work principle of PPCS series dust collector/bag filter
PPCS series dust filter is made up of shell, dust hopper, discharge dust device, frame and pulse removing dust system etc.
When dust air enter dust filter, first touch middle inclined baffle. Air flow turn to dust hopper and the speed of airflow become slowly. As the inertia, crude material in the air will fall into dust hopper directly and obtain pre-filtering dust.Airflow from dust hopper will pass through metal frame upward, dust is collected on the surface of filtering bag.
After purified air enter into up cleaning room, discharge from air outlet pipe. Inlet of type PPCS is arranged on the dust hopper. Airflow enter dust hopper and first touch the baffle of up air inlet. The function is the same as the above.
The shell is separated into absolute dust filtering room by baffle. According to the giving time interval, clean the dust of every chamber. Every dust chamber is installed one lifting valve. Close lifting valve when removing dust and cut off airflow from dust filter, pulse valve will open and spray high pressure atmosphere to smooth away the dust of filtering bag. The spraying width of dust filter and dust filter and dust frequency is controlled by special dust program controller automatically and continuously.
(Live chat)
info@bidragon.com
